Installing the lifting beam and the lifting hook

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Metal Bracket For Servo Hose

Courtesy of VOLVO CARS OF NORTH AMERICA.

Loosen the servo hose's plate bracket from the auxiliary unit's rotation guard.

Fig 2: Installing Lifting Beam And Lifting Hook

Courtesy of VOLVO CARS OF NORTH AMERICA.

Place lift tool 9995006 slightly in front of the engine's front lifting eye. Use lift arm 9995383 and lift hook 9995460 to lift the engine a few mm at the leading edge.