Removing the front-rear member
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- the front and rear splash guards under the engine
- the heat deflector plate in front of the output shaft
- the nuts from the engine mountings at the front and rear edges
- four screws (two long and two short)
- the two screws from the engine mountings. Remove the front-rear member.