Installing the mass air flow (MAF) sensor
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Install a new O-ring.
- Position the mass air flow (MAF) sensor with the connector upward.
- Tighten the screws.
- Connect the connector.
- Clean the air intake hose. Press the air intake hose firmly into place on the mass air flow (MAF) sensor.
- Tighten the clamp.
- Check the function.