Checking And Adjusting the Boost Pressure Control (BPC) Valve On the Turbocharger (TC): Reinstall/Reconnect
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Install the washer and the tensioner pin on the lever
- Remove special tool
- Connect the hose to the pressure servo for the boost pressure control (BPC) valve. Use a clamp
- Install the turbocharger (TC) control valve on the air cleaner (ACL) housing
- Install the heat shield for the exhaust manifold.
- Erase diagnostic trouble codes (DTCs)
- Test drive the car. Accelerate to wide open throttle (WOT) a couple of times
- Check that no diagnostic trouble codes (DTCs) have been stored.