Tool, connecting
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnecting/Connecting Tool 999 5545 And Pressure Regulator 999 5544 From/To Fresh Air Intake Hose
- Disconnect the fresh air intake hose from the mass air flow (MAF) sensor
- Connect special tool 9995545 and pressure regulator 9995544 to the remove hose. Tighten the hose clamp
- Use a hose clip to seal the crankcase ventilation hose
- Remove the oil filler cap
- Disconnect the lower hose from the canister purge (CP) valve.