LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Ignition And Control Systems - Removal, Replacement And Installation (644 Body)) >> Replacing Engine Control Module (ECM) (B4204T2 CVVT; 2000) >> Replacing the engine control module (ECM) >> Removing and installing the control module >> Installing the control module

Installing the control module

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Control Module Installation
GLL100911Courtesy of VOLVO CARS OF NORTH AMERICA.

Check that no pins or sockets are damaged on the connector or the control module.

Connect the connector on the control module.

Screw the control module into place.

Reinstall the retaining strap and a new security screw