LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Ignition And Control Systems - Removal, Replacement And Installation (644 Body)) >> Replacing Engine Control Module (ECM) (B4204T2 CVVT; 2000) >> Replacing the engine control module (ECM) >> Finishing >> Reading and erasing diagnostic trouble codes (DTCs)

Reading and erasing diagnostic trouble codes (DTCs)

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Read off and erase diagnostic trouble codes (DTCs).

Screw the engine control module (ECM) into place.

Tighten the security screw.

Reinstall the side panels on the left and right-hand sides.

Test the function.

scientia non olet · About LEMON Manuals