Checking injectors

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Connect an ohmmeter between injector connector terminals 1 and 2 (injector side).

Fig 1: Identifying Canister Purge Valve Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

The ohmmeter should read approximately 14-15 Ω at +20 °C.

OK
Refer to Checking wiring and terminals
NOT OK
Refer to Defective injector