Checking for an open-circuit

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

FENIX 5.1

Check the cable between DSA control module terminal 5 and engine control module (ECM) terminal 41 for an open-circuit according to Open-circuit, permanent faults .

EMS 2000

Check the cable between DSA control module terminal 5 and engine control module (ECM) terminal 36 for an open-circuit according to Open-circuit, permanent faults .

Other information

To connect the breakout box for DSA, see Connecting the breakout box. DSA .
To connect the breakout box for FENIX 5.1, see Connecting the breakout box. FENIX 5.1 .
To connect the breakout box for EMS 2000, see Connecting the breakout box. EMS 2000 .

Fig 1: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Checking For Open Circuit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to Verification