Checking wiring and terminals
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Check the DSA control module and engine control module (ECM) connectors for contact resistance and oxidation according to Contact resistance and oxidation .
FENIX 5.1
- Check the cable between the DSA control module terminal 15 and engine control module (ECM) terminal 42 for an intermittent open-circuit according to Open-circuit, intermittent faults . Check for an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults . Check for an intermittent short-circuit to supply voltage according to Short-circuit to supply voltage, intermittent faults .
EMS 2000
- Check the cable between the DSA control module terminal 15 and engine control module (ECM) terminal 20 for an intermittent open-circuit according to Open-circuit, intermittent faults . Check for an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults . Check for an intermittent short-circuit to supply voltage according to Short-circuit to supply voltage, intermittent faults .
Other information
- To connect the breakout box for DSA, see Connecting the breakout box. DSA .
- To connect the breakout box for FENIX 5.1, see Connecting the breakout box. FENIX 5.1 .
- To connect the breakout box for EMS 2000, see Connecting the breakout box. EMS 2000 .
- Continue
Refer to Information