Installing the Parking Brake Cable Underneath the Car
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Press the parking brake cable through the floor. Install the lead-in. Route the parking brake cable up to the brake caliper.
Install the cable on the chassis with the support.
Hook the inner cable onto the handle in the brake caliper. Pull the outer cable into the support.
Install the parking brake cable spring (if applicable).
Secure the parking brake cable with the support.
Install the splashguard (applies to the left parking brake cable).