Installing the Parking Brake Cable Underneath the Car
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Thread the parking brake cable through the hole in the floor. Install the lead-in. Route the cable up to the brake caliper
- Install the cable on the chassis with the support
- Hook the mechanical cable into the brake caliper arm. Insert the sheath into the support
- Secure the parking brake cable with the support
- Install the splashguard (applies to the left parking brake cable).