Measuring Lateral Runout In Hub (Front/Rear): Preparations
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Remove
- the hub cap and the wheel.
- the brake caliper and hang it on a steel wire to avoid damage to the brake hose. Rear brake disc: remove the brake hose from the support.
Mark the position of the brake disc on the hub so that it can be reinstalled in the same position.
Clean hub flange carefully.
Remove rust using a iron scrapper or a steel brush.