Installing the Rear Brake Disc
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Take care with the new brake disc. Careless handling may cause damage such as out-of-true.
Install the new brake disc on the hub. Tighten the mounting screw. Tighten to 5 Nm .
Install
- the entire caliper holder including the caliper. Use new screws. Tighten to 55 Nm
- the brake pads. See Brake Pads Rear, Replacement .
Check the parking brake if necessary. See Parking Brake, Adjusting .
Install the wheel. See Brake Pads Rear, Replacement .