LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Wheel Brake - Removal, Replacement And Installation (644 Body)) >> Replacement Of Components (2000) >> Replacement Of Rear Brake Disc >> Cleaning And Inspecting the Brake Disc And Hub

Cleaning And Inspecting the Brake Disc And Hub

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cleaning/Checking Brake Discs And Hubs
GLL116142Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE: Cleaning is important for the prevention of brake disc wobble (lateral runout).

Check that the hub flange is clean.

Remove rust with steel wool or a wire brush.

Inspect the hub.

If the hub is damaged, measure its lateral runout. See Measuring Lateral Runout In Hub (Front/Rear) .