Cleaning And Inspecting Brake Disc And Hub
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Cleaning is important for preventing lateral runout from brake disc.
Ensure that the hub flange is clean.
Remove rust using a iron scrapper or a steel brush.
Inspect hub.
If the hub is damaged, lateral runout at the hub should be measured. See Measuring Lateral Runout In Hub (Front/Rear) .