Installing the power brake booster
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Clean the power brake booster and the cowl panel.
Install in the engine compartment:
- A new gasket on the power brake booster
- the power brake booster. Do not damage the power brake booster.
Ensure that the support rod is correctly positioned on the brake pedal
- the vacuum hose.
Install in the passenger compartment:
- The four nuts for the power brake booster.
Tighten to 23 Nm
- the bolt, washer and spring for the support rod
- the soundproofing panel. Note the wiring for the courtesy lighting
- the screws for the soundproofing panel.