Installing rear wheel sensor
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Clean the sensor seat of dirt and rust so that the sensor is in the correct position relative to the pulse wheel. Clean the pulse wheel using a soft brush.
Lightly grease the sensor. Clean the mounting surfaces so that the sensor can be fitted easily.
Thread the sensor cable through and install the sensor. Tightening torque 55 Nm.
Press the sensor cable into the support.