Installing drive shaft in knuckle

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Check the sealing ring in the knuckle.

Carefully install the shaft in the knuckle.

Install

a new retaining nut and ring on the drive shaft.
the knuckle in the shock absorber support, using new bolts and nuts. Tightening torque 90 Nm.