Installing the mounting for the exhaust pipe

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Front Rubber Mountings For Exhaust Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the mounting for the exhaust pipe and the screws on the cross member. Tighten to 25 Nm
the heat deflector plate. Tighten to 10 Nm .