LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Transmission - Cleaning, Inspection And Adjustment (644 Body)) >> Checking And Adjusting Mechanical Components (Aw50-42; 2000) >> Adjusting gear selector cable >> Adjusting the transmission cable >> Setting R position

Setting R position

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Transmission Gear Position
GLL125330Courtesy of VOLVO CARS OF NORTH AMERICA.

Push the lever on the gear-shift position sensor forward to position P.

NOTE: Do not move the transmission cable. The position of the transmission cable must not be altered.

Check P by trying to roll the car.

Move the lever to the next position, R  .

Apply a little grease 1161241-3 to the lever pin.

NOTE: Do not change the position of the lever.
scientia non olet · About LEMON Manuals