WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Gear-Shift Position Sensor
Courtesy of VOLVO CARS OF NORTH AMERICA.
Install the cable duct on the screw. Tighten to 25 Nm
.
Install the lever on the control shaft. Tighten to 16 Nm
.