Aligning the counterhold for automatic clutch adjustment
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
The three pins on the counterhold lock the automatic adjustment.
Position the tool as shown in the illustration.
Ensure that all the three pins (see the illustration) enter the groove in front of the tension springs for the automatic adjuster.
Press the ring against the pressure plate. Pull out the counterhold springs. Secure the three hooks in the center holes of the outer edge. See Block the flywheel .