Wiring harness supplemental restraint system (SRS): Notes
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Special tools:
NOTE:
The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.
CAUTION:
As the SRS system is a safety system, it is extremely important that these instructions are carefully followed when carrying out repairs in the cable harness.
CAUTION:
Ensure that the new pin has the same type of surface treatment as the old one.
WARNING:
Do not carry out any work on the cable for the SRS system until the connector has been disconnected from the relevant airbag or seat belt tensioner. There is otherwise a risk of static electricity deploying the component.