Removing engine control module bracket

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Upper Screws For Engine Control Module Bracket

Courtesy of VOLVO CARS OF NORTH AMERICA.

Switch off the ignition.
Remove the upper screws (2 pcs.) that hold the engine control module bracket.
Remove the front and right splash guard.

Fig 2: Identifying Lower Screws For Engine Control Module Bracket

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the lower screws (2 pcs.) that hold the engine control module bracket.
Lift up the control module from the engine compartment.