Driver Information Module, Removing/Installing: Removal: Conditions
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Before replacing control module, it's important to read out how the old control module is programmed. This is done in VIDA Vehicle communication. Read out and note the programmed values.
After replacement, the data in question shall be programmed in the new control module. If values cannot be read out, ask your nearest manager/sales company/customer so that the new control module gets the same configuration as the old control module.
- Note any radio code and indicator reading.
- Ignition off.
- Disconnect the battery's negative cable.