Driver Information Module, Removing/Installing: Installation: Programming
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
A new non-programmed driver information module will not work until it's programmed.
In case of new outside temperature sensor and temperature display is installed, proceed as follows:
Program function for showing temperature which is done via VIDA vehicle communication.
For installation of new display for trip computer, proceed as follows:
Order the software. See 9139885 .
For installation of new cable plate (control module) with instrument, proceed as follows:
Order the software. See 9139884 .