Draining coolant from engine
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When replacing the cooling water it is also important that the engine be drained.
- Remove cylinder block drain plug.
- Rinse the cylinder block with water.
- Apply sealant (art. no. 116 1056) to the drain plug and tighten.
Torque setting: 28.8 ft lb