Combined instrument panel, installing

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Reinstall the combined instrument panel (procedure in reverse order).
First Install the front protection, then the glass.
NOTE:
Note the following:
When installing the front protection take care with the two small pins on the underside. The pins should be inserted in the corresponding openings in the white housing.
When the front black protection is installed, the pins should be pushed in slightly to avoid light leakage from the underside of the speedometer.
NOTE:
This should be done with some soft material (rubber or cloth), never by finger only.

NOTE:

Ensure that the connectors are correctly positioned.