Install the windshield washer pump
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
HINT: Before installing the pump immerse, the inlet pipe in water or a soap solution to avoid compressing the rubber seal.
- Install the washer motor. Press the washer motor carefully into place.
- Connect the connector. Connect the hose to the washer motor.
- Check that the washer motor functions.
- Fill the reservoir. Check for leakage.
- Install the front splash guard.