Install the washer reservoir
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
HINT: Before installing the pump, immerse the housing in water or a soap solution to avoid compressing the rubber seal.
Install:
- The pump and the sensor. Press it carefully into place
- Tighten the mounting screw for the carbon filter
- The washer reservoir (5 screws)
- The hoses and connectors
- The headlamp cover
- Fill the reservoir. Check for leaks
- Install the hub and wheel
- Install the fog lamp and the splash guard.