Installing lifting beam and lifting hook on engine lifting eyelet

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lifting Beam And Lifting Hook Installed

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Position the stand for lifting beam 9995716 on the upper wheel arch members.

Then position the lifting beam directly above the engine lifting eyes on both sides.

Connect lifting hook 9995460 . Tighten to light contact.