Install the support member under the engine.
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
While working, use the mobile jack 9985972 as a support beneath the front part of the transmission.
Remove the support between the transmission and engine towing eye.
Install the support member.
Use long screws in the front edge of the support member and short ones in the rear edge. Tighten the screws to 70 Nm .
Fit the screws of the support member/transmission brackets. Use new lock nuts.
Remove the mobile jack.
Tighten the rear nut first and then the front. Tighten to 55 Nm .
Install the heat deflector plate on the rear bracket.