Install the right driveshaft.
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Position the mobile jack 9985972 as a support under the control arm.
Fit the drive shaft in the differential.
Fit the cap on the drive shaft bearing. Tighten to 25 Nm .
Fit the wheel spindle to the spring strut. Install the screws and new lock nut finger-tight.
CAUTION:
Ensure that the sealing ring in the transmission and the drive shaft boots are not damaged.