Transverse support member, installing

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Cross Stay Member

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the member and retaining screws.

Tighten the screw on the right side first. Tighten the retaining screws to 50 Nm .