Install the screw for the front engine pad and the torque rod mounting in the sub-frame

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Gearbox Torque Rod Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the screw for the front engine pad. Tighten to 50 Nm
the torque rod mounting on the transmission.

NOTE:

Use new screws for the mounting. Tighten to 50 Nm .