Install the dip stick pipe and the ground lead on the transmission
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Install the screw with the ground lead and the dip stick pipe in the transmission.
Use a new rubber seal. Apply petroleum jelly to the rubber seal. Tighten to 25 Nm .
NOTE:
Carefully check that the rubber seal is correctly positioned in the transmission. Failure to do so may result in leakage.