Installing the drive shaft
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Turn the stub axle for turning to the left.
Position mobile jack 9985972 under the control arm as a support.
Remove:
- the bearing cap for the drive shaft
- the screws for the stub axle and spring strut.
Turn out the stub axle while pulling out the drive shaft. Do not stretch the brake hose and ABS line.
Position the end of the drive shaft on the support member. Place a cloth underneath to protect the drive shaft against dirt and scratches.
Hang the stub axle on the spring strut. Use hook 9995045 .