Installing stub axle / spring strut and brake components

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting Drive Shaft From Gearbox

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the nuts and screws for the stub axle and spring strut. Tighten to 90 Nm.
CAUTION:
Use new nuts.
the ABS line on the wheel arch and spring strut
the brake hose with the retaining clip on the spring strut
the track rod. Tighten to: 42 Nm.