Splash guard and drive shaft nut, removing
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the two screws for the splash guard in the wheel arch.
- Pry out the splash guard. Tie it up so that there is space for the drive shaft.
- Install the counterhold 9995683 on the hub. Remove the drive shaft nut .
- Remove the counterhold.