Drive shaft center nut and tightening torque: Notes
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
HINT: Applies to 1998-2000: If the lock nut which was installed does not remain in place or was replaced during a repair, flanged nut (P/N 3089 6406) must be used with the same tightening torque as for the 2001 - (C) version.