Wiring Harness Supplemental Restraint System (SRS): Notes
Special tools:
NOTE:
The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.
CAUTION:
As the SRS system is a safety system, it is extremely important that these instructions are carefully followed when carrying out repairs in the cable harness.
CAUTION:
Ensure that the new pin has the same type of surface treatment as the old.
WARNING:
Do not carry out any work on the cable for the SRS system until the connector has been disconnected from the relevant airbag or seat belt tensioner. There is otherwise a risk of static electricity deploying the component.