Child Seat, Padded Upholstery, Backrest: Install
NOTE:
The foam pads must be removed for washing.
- Pull up the head restraint.
- Fold up the child seat and lift it up at the rear edge.
- Attach the padded upholstery on the rear edge of the seat cushion.
- Fold the seat cushion back into place.
- Pull the padded upholstery over the seat cushion's front section and pull the retaining strap (1) under the front edge of the seat cushion.
- Pull the padded upholstery up to the head restraint.
- Secure the padded upholsteries Velcro straps around the strut (1) of the head restraint.
- Adjust the head restraint so that it provides optimum protection for the child's head.