LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Adhesive And Surface Treatment Material - General Information (544 Body) >> Surface Treatment Material >> Polishing System >> General Information

General Information

WARNING:

Always follow the manufacturers instructions for the correct servicing unit operating procedure.

NOTE:

Use polishing machine adjustable between 1000 RPM and 3000 RPM.

A three-step polishing system has been developed by Volvo to rectify any paint defects on new vehicles.

A two-step sanding procedure has been developed to be followed by the polishing procedure.

Training, supplies as well as advice will be provided by the manufacturer 3M.

scientia non olet · About LEMON Manuals