Mobility Connection Package: Reinstall:

Fig 1: Identifying Glovebox Rear Section

Courtesy of VOLVO CARS OF NORTH AMERICA.

99 Dashboard 

• the lower vent.
• the sound proofing.
• the rear section of the glovebox by guiding it in diagonally inside the center console and then straight forward. The rear section must be positioned on the outside of the remaining inner section.
• the clip for the vent on the glovebox.
• the panel on the dashboard end face.
• Remove the tape.
• the panel above the center console. Check that the cable to the control panel is not pinched.
• the sill trim panels.

Fig 2: Identifying VIDA (Service Information) To Program Software

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Download the software for the accessory's function following the service information in VIDA (Volvo scan tool).

Fig 3: Identifying Bluetooth Unit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check the function of the Bluetooth system as follows: 

• Turn the ignition key to position I.
• Turn the radio on. Wait 20 seconds.
• Check that the control panel for Bluetooth illuminates. Press the round button (1) in the middle of the control panel. The radio should then mute and a voice should be heard.
• Press the red handset button (2). The voice should now stop and the audio from the radio returns.