Lighting - Installation Instructions, Accessories (XC)

• Auxiliary Spot Lamps (2001-2007)
  • Introduction
  • Auxiliary spot lamps
    • Remove light insert
    • Install rubber grommet and metal ring
    • Installing spot lamp mounting
    • Installing and connecting
    • Install spot lamp on bracket
• Fog Lamp Protectors (2001-2004)
  • Introduction
  • Fog lamp protectors
    • Preparations
    • Remove fog lamp protector
    • Press plastic nuts into clips
    • Clean and dry surfaces
    • Installing clips
    • Install fog lamp protector
    • Maintenance
• Fog Lamps (2001-2002)
  • Introduction
  • Fog lamps
    • Notes
    • Position front seat to rear
    • Remove cover
    • Remove left air baffle
    • Remove center air baffle
    • Install spring nuts
    • Install fog lamp
    • Installing cable harness
    • Reinstall air baffles
    • Reinstall fuse and cover
    • Removing side panel and soundproofing panel
    • Reinstalling side panel and soundproofing panel
    • Installing light bulb and button
• Headlamp Guard (2001-2004)
  • Introduction
  • Headlamp guard
    • Installation
      • Preparations
      • Check angled tabs
      • Press clips into gap
      • Securing clips
      • Preparing headlamp guard
      • Securing headlamp
      • Finishing
    • Removing prior to using a car wash
      • Introduction
      • Remove headlamp guard and clips
      • Remove inner and outer clips
• Mounting Kit For The Front Reading Lamp, Front Seat (2001-2007)
  • Introduction
  • Mounting kit for the front reading lamp, front seat
    • Notes
    • Preparations
      • Preparations
    • Installing the lamp mounting
      • Installing lamp mounting and reading lamp
      • Disassembling reading lamp when replacing bulb
• Installation Kit, Auxiliary Lights (2001-All)
  • Introduction
  • Installation kit, auxiliary lights
    • Notes
    • Preparations, front
      • Preparations
      • Releasing front grille catches
      • Remove front grille
      • Remove intake manifold
      • Detach air cleaner (ACL) module
      • Move air cleaner (ACL) module aside
      • Routing cable harness
      • Guide harness through radiator grille
      • Remove number plate
    • Installation, auxiliary lights
      • Drill bracket holes through bumper cover and bumper rail
      • Drill bracket holes through plastic and bumper rail
      • Installing spacer sleeves in holes
      • Affix straps in bracket holes
      • Guide cable ends through tie straps
      • Open lamp housing
      • Install lamp housing on mounting
      • Route cable harness into lamp housing
      • Connect cables to lamp
      • Assemble auxiliary light
      • Reinstallation
      • Installing fuse
    • Installing the switch, -2004
      • Remove panel in front of gear selector lever
      • Remove screws from dashboard environment panel
      • Remove dashboard environment panel
      • Detach surround
    • Installing the switch, 2005-
      • Remove 12V socket cover plug
      • Remove keypad panel
      • Install switch and reinstall surround
    • Finishing work, installing and adjusting
      • Finishing
      • Installing top strut when auxiliary lights vibrate