Metal Pedals: Notes

Fig 1: Removing Original Covers

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig. 1 applies to cars with manual transmissions. Fig. 2 applies to cars with automatic transmissions

Remove the rubber covers from the pedals by grasping the upper edge and pulling backwards.
Clean, if necessary, all pedal surfaces where the new rubber covers will be positioned.

Fig 2: Removing Original Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Opening the Tabs

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 4: Fitting New Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

Hook the cover at the upper edge, at the same time hold the tabs and pull downwards.
Press the cover firmly onto the pedal.

Fig 5: Securing New Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

Pull the tabs down slightly and check that the edges of the cover surround the pedal edges. Pull the cover to ensure that it is secure.