Installing the drive shaft and the viscous coupling
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Right-hand side:
Carefully align the viscous coupling in the transmission. Ensure that the sealing ring is not damaged.
Install:
- the drive shaft to the viscous coupling. Press the drive shaft so that the locking in the viscous coupling secures the drive shaft
- the bearing cap. Tighten to 25 Nm .