Removing the front seat belt (inertia) reels
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- the B-post panel according to Panel, B-post, replacing
- seat belt buckle end mounting.
- the connector. See Igniter wire connector
- screws (x 2)
- seat belt (inertia) reel with seat belt tensioner by pulling it straight up.
Remove the seat belt (inertia) reel and the seat belt tensioner by pulling the unit straight upwards and leaving the clips and fixture in place.