LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2007 >> S60 T-5, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Engine And Transmission - Removal And Installation) >> Engine Mechanical >> Engine/transmission, removing/installing >> Drive shaft left, replacing (M56 and M58 2000-) >> Installing the drive shaft >> Align the drive shaft in the hub and the spring strut in the wheel spindle

Align the drive shaft in the hub and the spring strut in the wheel spindle

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rubber Seal & Constant Velocity Joint
GLL106610Courtesy of VOLVO CARS OF NORTH AMERICA.

Ensure that the rubber seal is in position on the constant velocity joint.

Fig 2: Identifying Drive Shaft, Hub, Strut And Spindle
GLL109238Courtesy of VOLVO CARS OF NORTH AMERICA.

Use new screws and lock nuts for the wheel spindle and spring strut. Tighten to light contact.

scientia non olet · About LEMON Manuals